- Home
- ยป
- Our Products
- »
- 3M Cable Jointing Kits
3M Cable Jointing Kits
our range of cable jointing & termination kits includes :
3m heat shrink cable accessoriesAnti tracing tubes heat shrink3m boots heat shrink right angle bootsTerminal protectorsIndoor end termination kits up to 36 kvOutdoor end termination kits upto36 kvStraight thro jointing kits upto36 kvHeat shrink bus bar sleeves upto36 kv
3M Cold Shrink Cable Jointing Kits
Features | COLD SHRINK |
Length | 850 MM |
Usage/Application | POWER |
Conductor Size | 185 SQ.MM 300 SQ.MM |
Voltage Type | Medium Voltage |
Cable Joint | COLD SHRINK TYPE |
Frequency (Hz) | 50 |
Model Number | QS1000 |
Packaging Type | COLD SHRINK |
Flame Retardant | Yes |
Automation Grade | Automatic |
Color | BLACK |
Brand | 3M |
Size (square mm) | 300 SQ.MM 185 SQ.MM |
Material | EPR |
Power/Voltage | 11KV 33 KV |
Number of Cores | 4 Core, 2 Core, 3 Core, 3.5 Core |
Power | 11KV 33KV |
All types of cold shrink cable joints have been tested in accordance with VDE 0278, HD 629 and/or BS7888. Details of type tests are available upon request.
Features:
One part joint body
100% tested after manufacture
No heat required
Tool free installation
Permanent radial pressure
Suitable for paper and polymeric cables
Compatible with compression and mechanical connectors
Low temperature installation
Provides consistent installation quality
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
3M Cold Shrink Jointing Kits
Color | Black |
Brand | 3 m |
Number of Cores | 2 Core, 3 Core, 3.5 Core, 4 Core |
Voltage Type | Mediim/high / low volatage |
Model Number | QS1000 |
Flame Retardant | Yes |
Core Type | Single Core |
Conductor Material | Copper |
PCC supplier of 3M Cold Shrink Jointing Kits. These kits are manufactured from a specially formulated silicone material, which provides flexibility, easy installation at low temperatures and superior electrical performance over a wide range of operating temperatures. The finished body is expanded and loaded onto a removable supporting core, which allows the joint to be installed without the need for tools or heat. These 3M QS1000 cool shrink kit is injection moulded and consists of three layers. A semi-conductive electrode, which forms a Faraday Cage around the connector, a high permittivity insulation layer, which both insulates and stress controls, and an outer semi-conductive layer which ensures all screens are at earth potential. All finished bodies are tested after manufacture and undergo AC Withstand and Partial Discharge testing.
All types of cold shrink cable joints have been tested in accordance with VDE 0278, HD 629 and/or BS7888. Details of type tests are available upon request.
Features:
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool-free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low-temperature installation
- Provides consistent installation quality
Additional Information:
- Item Code: QS1000
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: CHENNAI
- Production Capacity: 1000 PCS
Cold Shrink Jointing Kits
Number of Cores | 2 Core |
Voltage Type | Low Voltage |
Core Type | Single Core, 3 Core |
Model Number | QS1000 |
Automation Grade | Manual |
Color | Black |
Brand | 3M |
PCC supplier of 3M Cold Shrink Jointing Kits .These kits are manufactured from a specially formulated silicone material, which provides flexibility, easy installation at low temperatures and superior electrical performance over a wide range of operating temperatures. The finished body is expanded and loaded onto a removable supporting core, which allows the joint to be installed without the need for tools or heat.These 3M QS1000 cool shrink kit is injection moulded and consists of three layers. A semi-conductive electrode, which forms a Faraday Cage around the connector, a high permittivity insulation layer, which both insulates and stress controls, and an outer semi-conductive layer which ensures all screens are at earth potential.All finished bodies are tested after manufacture and undergo AC Withstand and Partial Discharge testing.
All types of cold shrink cable joints have been tested in accordance with VDE 0278, HD 629 and/or BS7888. Details of type tests are available upon request.
Features:
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low temperature installation
- Provides consistent installation quality
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Cold Shrink Cable Jointing Kits
Conductor Material | Copper |
Brand | 3 m |
Voltage Type | Mediim/high / low volatage |
Tensile Strength | 10 kN |
Color | Black |
Cable Joint | Cold Shrink Type |
Frequency | 50 Hz |
Automation Grade | Manual |
Core Type | Single Core |
Number of Cores | 2 Core, 3 Core, 3.5 Core, 4 Core |
All types of cold shrink cable joints have been tested in accordance with VDE 0278, HD 629 and/or BS7888. Details of type tests are available upon request.
Features:
- One part joint body
- 100% tested after manufacture
- No heat required
- Tool free installation
- Permanent radial pressure
- Suitable for paper and polymeric cables
- Compatible with compression and mechanical connectors
- Low temperature installation
- Provides consistent installation quality
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
SVL Link Boxes
Product Brochure
Material | STAINLESS STEEL |
Brand | RAYCHEM |
Finishing Type | STEEL |
Frequency | 50HZ |
Phase | 3 PHASE 1 PHASE |
Series | THREE |
Type | SVL |
Usage/Application | EHV GROUNDING,SVL CROSS BONDING |
- Compact design
- Stainless steel
- 1-phase and 3-phase boxes
- Sheath voltage limiters (SVL)
Sheath Voltage Limiter (SVL 2)
Minimum Order Quantity: 6 Unit
Product Brochure
Material | STAINLESS STEEL -SVL POLYMERIC |
Brand | RAYCHEM TYCO |
Finishing Type | STEEL |
Frequency | 50 |
Phase | 3 |
Type | svl |
Usage/Application | EHV EARTH LINK BOX |
Voltage | 6KV 9KV |
TE’s high-voltage cable sheath protection system CPA is designed to the specific requirements in cable sheath protection. TE employ material scientists that test all materials used in our products. This is to ensure that the material can withstand harsh environments even before we design them into our products, where further product testing occurs.
Additional Information:
- Item Code: SVLCPA
- Production Capacity: 500
- Delivery Time: READY
- Packaging Details: CARTON BOX
3M HEAT SHRINK TERMINATION KIT
Minimum Order Quantity: 15 ea
Product Brochure
Material | PVC |
Type | heat shrink |
Size | 185 SQ,MM 300 SQ.MM 400 SQ.MM 630 SQ.MM 1000SQ.MM |
Number Of Core | 3 core 1 core |
Voltage | 11KV, 22KV, 33KV UE |
Core Type | 3 Core, Single Core |
Voltage Type | High Voltage or HT |
Length | 3 m |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Additional Information:
- Item Code: MHIMHO
- Production Capacity: 500
- Delivery Time: READY STOCK
- Packaging Details: CARTON
3M 33KV E Jointing Kits
Minimum Order Quantity: 20 Number
Product Brochure
Usage/Application | OUTDOOR JOINTING KIT |
Cable Joint | XLPE |
Power | 33KV E 22KV 11KV |
Conductor Size | 300 400 240 185 95 SQ.MM |
Power/Voltage | 33KV 11KV 22KV |
Voltage Type | Medium Voltage |
Type | Outdoor |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
Additional Information:
- Item Code: MHO
- Production Capacity: 500
- Delivery Time: READY STOCK
- Packaging Details: CARTON
3M 11KV Straight Thro Joint Kit
Minimum Order Quantity: 20 Unit
Product Brochure
Usage/Application | OUTDOOR HT JOINT |
Cable Joint | 11KV |
Power | 11KV |
Conductor Size | 3CORE X 185 SQ.MM 240 300 400 SQ.MM |
Voltage Type | Medium Voltage |
Voltage | 11KV 22KV 33KV |
Material | Cross Linked Polyolefin |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
Additional Information:
- Item Code: MHS
- Production Capacity: 500
- Delivery Time: READYSTOCK
- Packaging Details: CARTON
3M 33KV Outdoor End Termination Kit
Product Brochure
Core Type | 3 Core |
Voltage | 33KV 11KV 22KV |
Size | 185 240 300 400 630 SQ.MM |
Material | Cross Linked Polyolefin |
Color | RED |
Maximum Ambient Temperature | 80 |
Usage/Application | HT TERMINATION OUTDOOR |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3M 22KV Heat Shrink Jointing Kits
Minimum Order Quantity: 20 Unit
Product Brochure
Usage/Application | OUTDOOR ST. THRO JOINT |
Cable Joint | HT XLPE |
Power | 22KV |
Conductor Size | 185 240 300 400 SQ.MM |
Voltage Type | Medium Voltage |
Type | Outdoor |
Voltage | 22KV |
Material | Cross Linked Polyolefin |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
Additional Information:
- Item Code: MHSO
- Production Capacity: 500
- Delivery Time: READY STOCK
- Packaging Details: CARTON
3M 11KV Indoor End Term Kit
Product Brochure
Core Type | 3 Core |
Voltage | 11KV |
Material | Heat Shrinkable |
Size | 185 SQ.MM 300 SQ.MM |
Brand | 3M |
Diameter | 40 |
Flame Retardant | FR |
Usage/Application | CHGEAR TERMINATIONS |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3M 11 KV 3 C X 300 Indoor Termination Kit
Product Brochure
Core Type | 3 Core |
Voltage | 11KV 22KV 33KV |
Material | Heat Shrinkable |
Size | 240 -300 SQ.MM |
Brand | 3M |
Diameter | 44 mm |
Flame Retardant | FR |
Usage/Application | SWITCHGEAR VCB TERMINATIONS |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3M 11KV 3 Core x 400 SQ.MM Indoor Term Kit
Product Brochure
Core Type | 3 Core |
Voltage | 11KV E 11KV UE |
Material | Heat Shrinkable |
Size | 400 SQ.MM |
Brand | 3M |
Diameter | 48mm |
Flame Retardant | FR |
Usage/Application | SWITCHGEAR VCB BREAKER TERMINATIONS |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3m Cable Jointing Kits
Minimum Order Quantity: 50 Number
Core Type | Single Core, 3 Core |
Conductor Material | PVC |
Frequency | 50 Hz |
Number of Cores | 2 Core, 3 Core |
Automation Grade | Manual |
Brand | 3 m |
Conductor Size | 50 - 400 sq.mm 630 sq.mm |
Voltage Type | High Voltage |
3m Cable Jointing Kits are available for tape/wire shielded,armoured/unarmoured medium voltage single core and three core polymeric cables.3M Heat Shrinkable terminations utilize a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The non tracking heat shrinkable insulating outer tube is optimally designed for reliable environmental protection. The modular heat shrinkable skirts allow installation of the termination in inverted condition if required. For three core cable terminations, a heat shrinkable breakout is provided for environment sealing of the trifurcating crotch area.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.
3M Heat Shrink medium voltage joints are available for tape/wire shielded, armoured/ unarmoured medium voltage single core and three core polymeric cables. 3M Heat Shrinkable joint utilizes a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The stress control tube together with the insulating and dual walled (inside insulating & outside semiconducting) tubes forms the splice body.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: ROAD
- Production Capacity: 15000
- Delivery Time: READY STOCK
3M Cable Jointing Kits
Power | 33 KV |
Conductor Size | 300SQ.MM |
Voltage Type | High Voltage |
Core Type | 3 Core |
Conductor Material | Copper |
Frequency | 50 Hz |
Efficiency | 99% |
Brand | Raychem |
3M Cable Jointing Kits are available for tape/wire shielded, armored/ unarmoured medium voltage single core and three core polymeric cables. 3M Heat Shrinkable joint utilizes a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The stress control tube together with the insulating and dual walled (inside insulating & outside semiconducting) tubes forms the splice body.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.
Features:
- Available for 1-Core and 3-Core polymeric cables
- Provides excellent environmental protection and moisture sealing
- Wide conductor size ranges upto 1000 mm2
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: ROAD
- Production Capacity: 1500
- Delivery Time: READY STOCK
3M 33KV Termination Kits
Minimum Order Quantity: 12 Unit
Material | PVC |
Core Type | Single Core, 3 Core, 50 sqmm 95sq.mm 185 sq.mm 240 sq.mm 300 sq.mm 400 sq.mm 630 sq.mm |
Voltage Type | High Voltage or HT |
Number of Cores | 3.5 Core,4 Core,3 Core,2 Core |
Voltage grade | 1-36 kV |
3M 33KV Termination Kits are available for tape/wire shielded, armored/unarmoured medium voltage single core and three core polymeric cables.3M Heat Shrinkable terminations utilize a unique high dielectric constant (High K) stress control tube and mastic for effective grading of electrical stresses. The non tracking heat shrinkable insulating outer tube is optimally designed for reliable environmental protection. The modular heat shrinkable skirts allow installation of the termination in inverted condition if required. For three core cable terminations, a heat shrinkable breakout is provided for environment sealing of the trifurcating crotch area.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
All the grounding connections are solder-less.
Features:
- Available for 1-core and 3-core polymeric cables
- Provides excellent environmental protection and moisture sealing
- Wide conductor size ranges upto 1000 mm2
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: ROAD
- Production Capacity: 15000
- Delivery Time: READY STOCK
cold shink termination kits
Core Type | 5 Core, 3 Core, Single Core |
Voltage Type | high / low / medium |
Cable Joint | temination kit |
Model Number | QT111 |
Flame Retardant | Yes |
Color | black |
Brand | 3m |
Number of Cores | 4 Core, 2 Core, 3 Core, 3.5 Core |
PCC Supplier of 3m cold shrink termination kits .These 3m QTIII terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cables. QTIII is a one-piece silicone rubber termination, which is expanded and loaded onto a removable supporting core, which allows the termination to be installed without the need for tools or heat. The core is stepped to allow a greater application range for armoured cables. QTIII consists of a tubular silicone insulator, with a built in refractive stress control tube and compound,and a built in top seal. Due to this unique design the QTIII termination is installed in one operation without the need for any additional components.
These terminations are suitable for use on polymeric cables medium voltage up to 52kV.
Both indoor and outdoor terminations are available for single core and three core cables. QTIII terminations have been tested in accordance with IEEE Std 48-1990, VDE 0278 Part 4 and IEC/CENELEC. Details of type tests are availableupon request.
Additional Information:
- Item Code: QT111
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
3m Cold Shink Termination Kits
Core Type | 3 Core, Single Core, 5 Core |
Voltage Type | high / low / medium |
Cable Joint | temination kit |
Flame Retardant | Yes |
Automation Grade | Manual |
Color | black |
Brand | 3m |
PCC Supplier of 3m cold shrink termination kits .These 3m QTIII terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cables. QTIII is a one-piece silicone rubber termination, which is expanded and loaded onto a removable supporting core, which allows the termination to be installed without the need for tools or heat. The core is stepped to allow a greater application range for armoured cables. QTIII consists of a tubular silicone insulator, with a built in refractive stress control tube and compound,and a built in top seal. Due to this unique design the QTIII termination is installed in one operation without the need for any additional components.
These terminations are suitable for use on polymeric cables medium voltage up to 52kV.
Both indoor and outdoor terminations are available for single core and three core cables. QTIII terminations have been tested in accordance with IEEE Std 48-1990, VDE 0278 Part 4 and IEC/CENELEC. Details of type tests are availableupon request.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
3M 33KV Outdoor Termination Kit
Core Type | 3 Core |
Voltage | 11KV 33KV 22KV |
Size | 240 300 185 400 120 SQ.MM |
Material | Cross Linked Polyolefin |
Color | RED |
Maximum Ambient Temperature | 70 |
Usage/Application | OUTDOOR HT CABLE TERMINATION |
Cable Types | MV XLPE |
Termination Kit | INDOOR OUTDOOR |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3M 110KV Outdoor Termination Kit
Core Type | Single Core |
Voltage | 145KV |
Size | 630 1200 |
Material | Cross Linked Polyolefin |
Color | RED |
Maximum Ambient Temperature | 90 |
Usage/Application | EHV OUTDOOR |
Cable Types | EHV |
Termination Kit | OUTDOOR TERMINATION KIT |
3M Heat Shrink MV Termination Kit offers reliability and flexibility to meet the demands of cable network operators. The terminations are available for 11, 22 & 33 kV. The components of the kit are designed for conditions where the terminations are exposed to rainfall, outdoor sunlight, extremes of weather and heavily polluted areas. The specially engineered kits also take care of the typical partial and surface corona discharge for all power cables under challenging service conditions.
All the heat shrinkable components are supplied in an expanded state and would shrink effectively on application of heat.
- Anti-tracking/Lug Sealing Tubes to meet the outdoor conditions & performance requirements of medium voltage power cable end terminations. The material resists to splitting and has excellent arc resistance. These tubes are flexible, conforms to shapes/core bends, halogen free, self-extinguishing and suitable for both outdoor and indoor applications.
- Stress Control Tubes to provide electrical stress grading and relief on screen interruptions, which avoids localised stress accumulation leading to failures. 3M SCT tubes are made from specially formulated Polyolefin and provide good balance between electrical and mechanical properties.
- Lug Sealing Tubes to protect the interface between the termination lug and the cable core covered with the non-tracking MV tube.
- Lugs to provide high-performance connections.
- Cleaning Solvent Pouches to clean the XLPE insulation surface.
- Worm Clips to ensure good electrical connection.
- Tinned Copper Braid to protect conductive wiring from interference and handling large current and low voltage.
- Stress Control Mastic to be applied on the connector and semi-conducting screen to fill all the gaps and uneven surfaces.
- Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- PVC Insulation Tape, thermally compatible to insulate electrical wires and other materials that conduct electricity. Use as markings on the joint construction.
- Ferrules to protect against damage, splitting or wear.
- Black Sealing Mastic, conformable and durable mastic with excellent moisture and environmental seal used for sealing medium voltage cables and accessories and covering sharp edges.
- Tartan tape – GU Vinyl Tape to provide primary electrical insulation for all wire and cable terminations with pressure-sensitive rubber-based adhesive.
- Stress Grading Mastic, a water-resistant adhesive applied on connectors and cable components, used in MV joints to provide stress relief of the electric field.
Specifications
- Quick Cable Preparation
- Suitable for all types of conductors and connection shapes
- Environmental sealing by specially developed sealants
- Effective and reliable stress control
- Compact dimensions
- Immediate energisation possible
3M Medium Voltage Termination Kits
Minimum Order Quantity: 20 Piece
Voltage | 33KV |
Voltage Type | on |
Core Type | Single Core, 3 Core |
Features:
- Tough construction
- Reliable performance
- Longer service life
VTN Heat Shrink Tubes
Minimum Order Quantity: 500 Meter
Color | Black |
Hallow Sections | Circular |
Unit Length | 3m |
Size | 1/2 inch-1 inch, 1 inch-1.5 inch |
Max Temperature Resistance | 75 C |
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: ROAD
- Production Capacity: 10000000
- Delivery Time: READY STOCK