Call 08048617899 85% Response Rate

Send Email

Polymeric Surge Arresters

MV Surge Arrester upto 45kV for substation protection from lightening and switching over voltages. In past 15 years, almost all high-voltage networks used MO arresters. However, in medium-voltage networks, a substantial number of conventional gapped arresters (SiC resistors and series spark gaps) were installed until a few years ago. Today MO (Metal-Oxide) arresters without spark gaps have gained popularity. Networks require improved protection level and better performance in polluted environments. The switch to polymeric housings made it possible to do without the previously necessary spark gaps. Polymeric housings are reliable against ingress of moisture and provide minimal risk of failures (violent shattering of the housing). MVSA are manufactured using high quality MOV blocks which display excellent thermal and current handling characteristics due to guaranteed homogeneity of the varistor volume.  In the wrap design surge arresters, the MOV blocks are wrapped with fiberglass ribbons impregnated with epoxy resin to create stacks of MOV blocks.

  • Excellent TOV performance.
  • Safe, non-shattering failure in short circuit test 
  • Higher energy handling capability
  • more...

Polymeric Surge Arresters

Polymeric Surge Arresters
  • Polymeric Surge Arresters
  • Polymeric Surge Arresters
  • Polymeric Surge Arresters
Get Best Quote
Product Price: Rs 8,990 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Brochure

Product Details:
Number of Poles3 Pole
Power33 KV
Rated Voltage36KV
Rated short circuit breaking capacity10KA
Rated current36 KV
Poles Number3 Pole, 1 Pole
Making Capacity40KA
ClassificationType B, Type C
Breaking Capacity10KA
BrandRAYCHEM CG GERMANTECH
Insulation MediumMV
Voltage LevelHigh-Voltage
Housing TypePolymeric
Arrester TypeSurge Arrester

Polymeric Surge Arresters

polymeric surge arresters for voltage power distribution systems upto 800kV .Safety and reliability are vital in energy industry and we at power cable corporation are committed to pioneering improvements in performance at all levels.we superior range of high performance products. These product are manufactured according international standards including IEC, IEEE,ANSI and many national standards. We supply Raychem's polymeric surge arresters for voltage power distribution systems upto 800kV are designed to reliably protect your valuable assets from over voltage. They withstand severe outdoor exposure over long operating lifetime and help maintain service reliability in both overhead and underground installations. Raychem's polymeric surge arresters have passed the most rigorous tests (IEC 60099-4,ANSI C62.11, IEC 61643)

 



Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Yes! I am InterestedRequest A Callback

OCP24L POLYMERIC SURGE ARRESTERS

OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
  • OCP24L POLYMERIC SURGE ARRESTERS
Get Best Quote
Product Price: Rs 9,860 / PieceGet Best Price

Minimum Order Quantity: 12 Piece

Product Brochure

Product Details:
Number of Poles1 Pole
Rated Voltage33kV
Line Discharge Class2
SLL and SSL Mechanical Strength10KA
Country of OriginMade in India
QUALITY9300
MV Surge Arrester upto 45kV for substation protection from lightening and switching over voltages. In past 15 years, almost all high-voltage networks used MO arresters. However, in medium-voltage networks, a substantial number of conventional gapped arresters (SiC resistors and series spark gaps) were installed until a few years ago. Today MO (Metal-Oxide) arresters without spark gaps have gained popularity. Networks require improved protection level and better performance in polluted environments. The switch to polymeric housings made it

ossible to do without the previously necessary spark gaps. Polymeric housings are reliable against ingress of moisture and provide minimal risk of failures (violent shattering of the housing). MVSA are manufactured using high quality MOV blocks which display excellent thermal and current handling characteristics due to guaranteed homogeneity of the varistor volume.  In the wrap design surge arresters, the MOV blocks are wrapped with fiberglass ribbons impregnated with epoxy resin to create stacks of MOV blocks.

Distribution Medium Duty (DM) Class MV Surge Arrester (Outdoor)  

Bowthorpe EMP DA0 series surge arrester    

Tested in accordance with IEC60099-4 at independent accredited laboratories  

Direct moulded housing prevents moisture ingress  

Low residual voltages  

High-energy handling safe non-shattering short circuit behavior at higher current levels 

Maintenance free Hydrophobic silicone housing, tracking and erosion resistant  

Excellent cantilever and tensile performance  

Quality design conforming to international standards 

Application - protection of MV networks and equipment from lightning and switching surge related over-voltages, optimized to protect distribution assets including transformers and cable-end terminations 

 









 

1.08xUr



kNm



Additional Information:

  • Item Code: OCP24LOCP29L
  • Production Capacity: 500
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON BOXES
Yes! I am InterestedRequest A Callback

Polymeric MV Surge Arresters 30KV

Polymeric MV Surge Arresters 30KV
  • Polymeric MV Surge Arresters 30KV
  • Polymeric MV Surge Arresters 30KV
  • Polymeric MV Surge Arresters 30KV
Get Best Quote
Product Price: Rs 7,100 / NumberGet Best Price

Product Brochure

Product Details:
Power30KV
Rated short circuit breaking capacity10KA
Poles Number3 Pole, 1 Pole, 2 Pole
ClassificationType C, Type B
Line Discharge ClassClass 1, 2, 3
Core TypeSingle Core
Arrester TypeDistribution Type,Station Type
Leveraging on our modern manufacturing facility, we offer a broad collection Polymeric MV Surge Arresters 30KV
Yes! I am InterestedRequest A Callback

SURGE ARRESTERS GERMANTECH

SURGE ARRESTERS  GERMANTECH
  • SURGE ARRESTERS  GERMANTECH
  • SURGE ARRESTERS  GERMANTECH
  • SURGE ARRESTERS  GERMANTECH
Get Best Quote
Product Price: Rs 5,500 / PieceGet Best Price

Minimum Order Quantity: 25 Piece

Product Brochure

Product Details:
Rated Current1200AMPS
Making Capacity10KA
Breaking Capacity10 KA
BrandGERMANTECH
Insulation MediumPOLYMER
Voltage LevelHigh-Voltage
Rated Voltage36KV 45KV
Rated Impulse Withstand Voltage170KV
Rated Frequency50HZ
Dimension300 MM
surge arresters for medium voltage power distribution systems that are designed to reliably protect your valuable assets from overvoltage. They can withstand severe outdoor exposure over long operating lifetimes and help maintain service reliability in both overhead and underground installations. Raychem arresters have passed the most rigorous tests (IEC 60099-4, ANSI C62.11, IEC 61643
Low residual voltage – High energy absorption capacity
The metal oxide varistors used in the arresters provide high energy absorption and low residual voltages. Multiple high current lightning and long duration switching surges are absorbed without noticeable changes in the arrester characteristics or stability.
Outdoor applications
Indoor applications (gas-insulated switchgears, busbars)
Motor and generator protection
Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
Low voltage distribution systems
AC/DC railway applications
High Voltage
We provide a wide range of porcelain and polymeric transmission/substation surge arresters for applications up to 800 kV. The Bowthorpe EMP range of arresters has demonstrated reliable performance in environments all over the world for over 60 years.
Transmission line arrester
Modular series parallel polymeric surge arrester
Modular single column polymeric surge arrester
Polymeric housed surge arrester
Porcelain housed surge arrester
Cable sheath arrester


Additional Information:

  • Item Code: ZHYS
  • Production Capacity: 25000
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON BOXES
Yes! I am InterestedRequest A Callback

GERMANTECH POLYMERIC SURGE ARRESTERS

GERMANTECH POLYMERIC SURGE ARRESTERS
  • GERMANTECH POLYMERIC SURGE ARRESTERS
  • GERMANTECH POLYMERIC SURGE ARRESTERS
  • GERMANTECH POLYMERIC SURGE ARRESTERS
Get Best Quote
Product Price: Rs 17,960 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Brochure

Product Details:
Rated Current1250 AMPS
Making Capacity40 KV
Breaking Capacity10 KA
BrandGERMANTECH
Insulation MediumPOLYMERIC
Voltage LevelHigh-Voltage
Rated Voltage45KV 33KV UE
 
High Voltage
We provide a wide range of porcelain and polymeric transmission/substation surge arresters for applications up to 800 kV. The Bowthorpe EMP range of arresters has demonstrated reliable performance in environments all over the world for over 60 years.
Transmission line arrester
Modular series parallel polymeric surge arrester
Modular single column polymeric surge arrester
Polymeric housed surge arrester
Porcelain housed surge arrester
Cable sheath arrester
The metal oxide varistors used in the arresters provide high energy absorption and low residual voltages. Multiple high current lightning and long duration switching surges are absorbed without noticeable changes in the arrester characteristics or stability.
Outdoor applications
Indoor applications (gas-insulated switchgears, busbars)
Motor and generator protection
Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
Low voltage distribution systems
AC/DC railway applications


Additional Information:

  • Item Code: ZYH
  • Production Capacity: 100000
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON BOX
Yes! I am InterestedRequest A Callback

SURGE ARRESTERS POLYMERIC

SURGE ARRESTERS POLYMERIC
  • SURGE ARRESTERS POLYMERIC
  • SURGE ARRESTERS POLYMERIC
  • SURGE ARRESTERS POLYMERIC
Get Best Quote
Product Price: Rs 890 / PieceGet Best Price

Minimum Order Quantity: 150 Piece

Product Brochure

Product Details:
Rated Current250 AMPS
Rated Voltage9KV
Making Capacity10KA
Breaking Capacity10KA
BrandRAYCHEM
Insulation MediumPOLYMERIC
Voltage LevelMedium-Voltage
Surge Arrester
     
Low and Medium Voltage
Raychem offers surge arresters for medium voltage power distribution systems that are designed to reliably protect your valuable assets from overvoltage. They can withstand severe outdoor exposure over long operating lifetimes and help maintain service reliability in both overhead and underground installations. Raychem arresters have passed the most rigorous tests (IEC 60099-4, ANSI C62.11, IEC 61643).
 
Low residual voltage – High energy absorption capacity
The metal oxide varistors used in the arresters provide high energy absorption and low residual voltages. Multiple high current lightning and long duration switching surges are absorbed without noticeable changes in the arrester characteristics or stability.
Outdoor applications
Indoor applications (gas-insulated switchgears, busbars)
Motor and generator protection
Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
Low voltage distribution systems
AC/DC railway applications
 
High Voltage
We provide a wide range of porcelain and polymeric transmission/substation surge ar
Transmission line arrester
Modular series parallel polymeric surge arrester
Modular single column polymeric surge arrester
Polymeric housed surge arrester
Porcelain housed surge arrester
Cable sheath arrester


Additional Information:

  • Item Code: DA1
  • Production Capacity: 5000
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON BOX
Yes! I am InterestedRequest A Callback

Germantech Polymeric Surge Arresters

Germantech Polymeric Surge Arresters
  • Germantech Polymeric Surge Arresters
  • Germantech Polymeric Surge Arresters
  • Germantech Polymeric Surge Arresters
Get Best Quote
Product Price: Rs 9,860.00 / UnitGet Best Price

Minimum Order Quantity: 50 Unit

Product Brochure

Product Details:
Rated Current1250A
Making Capacity30KV
Breaking Capacity10KA
BrandGERMANTECH
Insulation MediumPOLYMERIC
Voltage LevelMedium-Voltage
Rated Voltage36KV
surge arresters for medium voltage power distribution systems that are designed to reliably protect your valuable assets from overvoltage. They can withstand severe outdoor exposure over long operating lifetimes and help maintain service reliability in both overhead and underground installations. Raychem arresters have passed the most rigorous tests (IEC 60099-4, ANSI C62.11, IEC 61643).
 
Low residual voltage – High energy absorption capacity
The metal oxide varistors used in the arresters provide high energy absorption and low residual voltages. Multiple high current lightning and long duration switching surges are absorbed without noticeable changes in the arrester characteristics or stability.
Outdoor applications
Indoor applications (gas-insulated switchgears, busbars)
Motor and generator protection
Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
Low voltage distribution systems
AC/DC railway applications
We provide a wide range of porcelain and polymeric transmission/substation surge arresters for applications up to 800 kV. The Bowthorpe EMP range of arresters has demonstrated reliable performance in environments all over the world for over 60 years.
Transmission line arrester
Modular series parallel polymeric surge arrester
Modular single column polymeric surge arrester
Polymeric housed surge arrester
Porcelain housed surge arrester
Cable sheath arrester
 


Additional Information:

  • Item Code: ZHY
  • Production Capacity: 25000
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON BOX
Yes! I am InterestedRequest A Callback

POLYMERIC SURGE ARRESTERS GERMANTECH

POLYMERIC SURGE ARRESTERS  GERMANTECH
  • POLYMERIC SURGE ARRESTERS  GERMANTECH
  • POLYMERIC SURGE ARRESTERS  GERMANTECH
  • POLYMERIC SURGE ARRESTERS  GERMANTECH
Get Best Quote
Product Price: Rs 17,950 / PieceGet Best Price

Minimum Order Quantity: 25 Piece

Product Brochure

Product Details:
Rated Current1250AMPS
Making Capacity10KA
Breaking Capacity10KA
BrandGERMANTECH
Insulation MediumPOLYMERIC
Voltage LevelHigh-Voltage
Rated Voltage45KV
GERMANTECH offers surge arresters for medium voltage power distribution systems that are designed to reliably protect your valuable assets from overvoltage. They can withstand severe outdoor exposure over long operating lifetimes and help maintain service reliability in both overhead and underground installations. Raychem arresters have passed the most rigorous tests (IEC 60099-4, ANSI C62.11, IEC 61643).
Low residual voltage – High energy absorption capacity

The metal oxide varistors used in the arresters provide high energy absorption and low residual voltages. Multiple high current lightning and long duration switching surges are absorbed without noticeable changes in the arrester characteristics or stability.

  • Outdoor applications
  • Indoor applications (gas-insulated switchgears, busbars)
  • Motor and generator protection
  • Special applications (HV cable sheath and current limiting arcing horns for covered conductor systems)
  • Low voltage distribution systems
  • AC/DC railway applications
High VoltageWe provide a wide range of porcelain and polymeric transmission/substation surge arresters for applications up to 800 kV. The Bowthorpe EMP range of arresters has demonstrated reliable performance in environments all over the world for over 60 years.
  • Transmission line arrester
  • Modular series parallel polymeric surge arrester
  • Modular single column polymeric surge arrester
  • Polymeric housed surge arrester
  • Porcelain housed surge arrester
  • Cable sheath arrester




Additional Information:

  • Item Code: ZHYS1
  • Production Capacity: 25000
  • Delivery Time: READY STOCK
  • Packaging Details: CARTON PACKINGS
Yes! I am InterestedRequest A Callback

Railway Surge Arresters

Railway Surge Arresters
  • Railway Surge Arresters
  • Railway Surge Arresters
  • Railway Surge Arresters
  • Railway Surge Arresters
  • Railway Surge Arresters
Get Best Quote
Product Price: Rs 13,500 / PieceGet Best Price

Product Brochure

Product Details:
ClassificationType B, Type C
Poles Number1 Pole, 3 Pole
Power11KV 33KV 24KV
Rated short circuit breaking capacity10 kA
Frequency50/60 Hz
MaterialPVC

We are the Leading Supplier, distributor, Exporter and Dealer of Railway Surge Arresters from chennai, Tamil Nadu India. We supply, distribute, trade this Railway Surge Arresters to Chennai, all over Tamil Nadu, Kerla, Andhra Pradesh, Karnataka all states of India. We Exports this Railway Surge Arresters to Middle-East countries, African Countries, Nepal, European Countries and all over the World.

HE60MC Traction Arresters

  • DC Arresters for systems using 700V-4kV DC, (HC60MC range)
  • AC arresters for systems up to 36kV AC (HSR range)
Yes! I am InterestedRequest A Callback

Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2

Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
  • Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
  • Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
  • Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
  • Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
  • Surge Arresters Indoor/ Outdoor Station Low Class (Sl) (Class 2) - Modelocp2
Get Best Quote
Product Price: Rs 8,990 / PieceGet Best Price

Product Brochure

Features • Conforms to IEC 60099-4 • Range from 6kV to 45kV, Station Low Class (SL) (Class 2) • Low residual Voltage "Safe non-shattering short circuit behavior to higher current levels" • Direct moulded housing to prevent moisture ingress • Hydrophobic silicone housing (Tracking and erosion resistant) Cage Construction: Excellent cantilever and tensile performance
Yes! I am InterestedRequest A Callback

German Tech Indoor Polymeric Surge Arresters

German Tech Indoor Polymeric Surge Arresters
  • German Tech Indoor Polymeric Surge Arresters
  • German Tech Indoor Polymeric Surge Arresters
  • German Tech Indoor Polymeric Surge Arresters
  • German Tech Indoor Polymeric Surge Arresters
Get Best Quote
Product Price: Rs 2,500 / UnitGet Best Price

Minimum Order Quantity: 15 Unit

Product Brochure

Product Details:
Poles Number1 Pole, 3 Pole
ClassificationType B, Type C
Housing TypePolymer
Nominal Discharge current4kAP
Reference current1 mAP
Frequency50 Hz
We are leading suppliers of surge arresters for German Tech Indoor Polymeric Surge Arresters, of Polymeric
surge arresters.

Indoor polymeric surge arresters for indoor Ht breakers - siemens ABB panels.

220KV SURGE POLYMERIC SURGE ARRESTERS 220 KV POLYMERIC INSULATOR
33KV SURGE ARESTERS 33KV POLYMERIC SURGE ARRESTERS

Additional Information:

  • Item Code: PSI1210
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: ROAD
  • Production Capacity: 500
  • Delivery Time: READY STOCK
  • Packaging Details: CATRON BOXES
Yes! I am InterestedRequest A Callback
Product Price: Rs 13,500 / PieceGet Best Price

Product Brochure

Conforms to IEC 60099-4 Range from 6kV to 36kV Station Medium Class (SM) (Class 3) Low residual Voltage Safe non-shattering short circuit behavior to higher current levels Direct moulded housing to prevent moisture ingress Hydrophobic silicone housing (Tracking and erosion resistant) Excellent cantilever and tensile performance 
Yes! I am InterestedRequest A Callback

EXPLORE MORE CATEGORIES

© Power Cable Corporation. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.