EXPLORE MORE CATEGORIES
- Home
- »
- Our Products
- »
- SVL -SHEATH VOLTAGE LIMITER LINK BOXDsv
SVL -SHEATH VOLTAGE LIMITER LINK BOXDsv
Offering you a complete choice of products which include ehv svl link boxes three phases, sheath voltage limiter link boxes -svl, link box with svl and svl sheath voltage limiter.
EHV SVL LINK BOXES THREE PHASES
Product Price: Rs 56,990 / PieceGet Best Price
Minimum Order Quantity: 6 Piece
Product Brochure
Product Details:
| Material | Stainless Steel |
| Brand | RAYCHEM RPG |
| Finishing Type | STAINLESS IP68 |
| Frequency | 50HZ |
| Phase | THREE PHASE SINGLE PHASE |
| Usage/Application | EARTH LINK BOXES EHV |
| Shape | RECTANGULAR |
| Country of Origin | Made in India |
| QUALITY | 57000 |
Raychem Rpg provides link boxes with optional sheath voltage limiters (SVLs) for high voltage (HV) and extra-high voltage (EHV) power cables. These SVLs, often made of zinc oxide, are designed to limit overvoltage on the cable sheath during transient events, improving system reliability and preventing insulation damage.
e • Stainless steel box • Different mechanical protection levels up to IP68 •
Electrically and mechanically type tested • With or without surge arresters •
With or without removable links • For concentric cables or single cables KE
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity's Raychem link boxes have reliable design and the housing is made of stainless steel. The enclosure is water and dust tight type tested to fulfil the requirements of protection class IP68 for installations below ground. For other applications, e.g. indoor installation, link boxes with less protection class are also available. Designs are capable to withstandings different electrical demands for several voltage classes. The link box lid is lockable by a standard security deadlock. The optional sheath voltage limiters (SVL) are made of zinc oxide and are designed to meet the requirements of IEC 60099-4. Link boxes with SVLs are available for different voltage classes and provide active over-voltage protection that contributes directly to improved reliability of the system
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity's Raychem link boxes have reliable design and the housing is made of stainless steel. The enclosure is water and dust tight type tested to fulfil the requirements of protection class IP68 for installations below ground. For other applications, e.g. indoor installation, link boxes with less protection class are also available. Designs are capable to withstandings different electrical demands for several voltage classes. The link box lid is lockable by a standard security deadlock. The optional sheath voltage limiters (SVL) are made of zinc oxide and are designed to meet the requirements of IEC 60099-4. Link boxes with SVLs are available for different voltage classes and provide active over-voltage protection that contributes directly to improved reliability of the system.
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity's Raychem link boxes have reliable design and the housing is made of stainless steel IP68
Additional Information:
- Item Code: SVL1
- Production Capacity: 1000
- Delivery Time: READY STOCK
- Packaging Details: CARTOB BOXES
Yes! I am InterestedRequest A Callback
SHEATH VOLTAGE LIMITER LINK BOXES -SVL
Product Price: Rs 33,000 / PieceGet Best Price
Minimum Order Quantity: 6 Piece
Product Brochure
Product Details:
| Material | Stainless Steel |
| Brand | RAYCHEM |
| Finishing Type | STAINLESS STEEL |
| Frequency | 50HZ |
| Phase | THREE PHASE WITH SVL |
| Usage/Application | SHEATH BONDING CABLE LINK BOXES |
| Shape | SQUARE |
| Country of Origin | Made in India |
| QUALITY | 34000 |
Advanced Features •Different designs available •Stainless steel box •Different mechanical protection levels up to IP68 •Electrically and mechanically type tested •1-phase and 3-phase boxes •With or without surge arresters •With or without removable links •For concentric cables or single core cables •Cross sections up to 300 mm2 •ZnO sheath voltage limiter for up to 7kV protection levels, larger protection levels on request •Short circuit current up to
Major Design Elements TE Connectivity's Raychem link boxes have reliable design and the housing (1) is made of stainless steel. The enclosure is water and dust tight type tested to fulfil the requirements of protection class IP68 for installations below ground. For other applications e.g. indoor installation, link boxes with less protection class are also available. Designs are capable to withstandings different electrical demands for several voltage classes. The link box lid is lockable (2) by a standard security deadlock. The optional sheath voltage limiters (SVL) (3) are made of zinc oxide and are designed to meet the requirements of IEC 60099-4. Link boxes with SVL’s are available for different voltage classes and provide active over-voltage protection that contributes directly to improved reliability of the system. The indoor post-insulators (4) made of epoxy resin are light weight and provide reliable electrical performance. The cable entries (5) are available with different inner diameters to fit single core or concentric cables with different cross sections. For perfect sealing cable entries are protected with coated heat shrink tubes (6). Sheath bonding cables are fixed by various methods with compression lugs (7) or by using clamping rings. The tinned copper links (8) are removable and available for cross sections up to 300 mm2. 8 4 3 2
Most popular cable sheath grounding options Single point earthing On relatively short cable sections the cable sheaths are solidly bonded together and earthed at one position. The sheaths of the three cable sections are connected and grounded at one point only. At all other points, there will be a voltage between sheath and ground that will be at its maximum at the farthest point from the ground bond. Since there is no closed sheath circuit, current does not flow along the sheaths and no sheath circulation current loss occurs.
Cross bonding The cable route is sectionalized into equal lengths. The sections are cross connected to neutralize the induced voltages. The phase sum of the introduced voltages will be zero and hence there will be no circulating currents when the cable laying is symmetrical.
Cross bonding and transposition For cable laying in unsymmetrical formations the induced voltages are not equal at each phase and therefore the phase sum of the voltages are not zero despite cross bonding. The cables are transposed at each joint position and the cable sheaths are cross connected, each cable occupies the same relative position in the cable formation. By this means the phase sum of the induced voltage sheaths
Additional Information:
- Item Code: SVL
- Production Capacity: 300
- Delivery Time: READY
- Packaging Details: WOODEN KRATE
Yes! I am InterestedRequest A Callback
Link Box With Svl
Product Price: Rs 54,000 / PieceGet Best Price
Product Brochure
Product Details:
| Material | Stainless Steel |
| Brand | RAYCEHM RPG |
| Finishing Type | STAINLESS STEEL |
| Frequency | 50HZ |
| Phase | THREE PHASE |
| Usage/Application | SHEATH BONDING CABLE EARTHING EHV |
| Shape | SQUARE |
| Country of Origin | Made in India |
e • Stainless steel box • Different mechanical protection levels up to IP68 •
Electrically and mechanically type tested • With or without surge arresters •
With or without removable links • For concentric cables or single cables KE
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity’s Raychem link boxes have reliable design and the housing is made of stainless steel. The enclosure is water and dust tight type tested to fulfil the requirements of protection class IP68 for installations below ground. For other applications, e.g. indoor installation, link boxes with less protection class are also available. Designs are capable to withstandings different electrical demands for several voltage classes. The link box lid is lockable by a standard security deadlock. The optional sheath voltage limiters (SVL) are made of zinc oxide and are designed to meet the requirements of IEC 60099-4. Link boxes with SVLs are available for different voltage classes and provide active over-voltage protection that contributes directly to improved reliability of the system
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity’s Raychem link boxes have reliable design and the housing is made of stainless steel. The enclosure is water and dust tight type tested to fulfil the requirements of protection class IP68 for installations below ground. For other applications, e.g. indoor installation, link boxes with less protection class are also available. Designs are capable to withstandings different electrical demands for several voltage classes. The link box lid is lockable by a standard security deadlock. The optional sheath voltage limiters (SVL) are made of zinc oxide and are designed to meet the requirements of IEC 60099-4. Link boxes with SVLs are available for different voltage classes and provide active over-voltage protection that contributes directly to improved reliability of the system.
Link Boxes are used for earthing and bonding cable sheaths of single core cables so that the induced voltages and circulating currents are eliminated or reduced. Single core cables in operation carry alternating currents and induced voltages in the metallic sheath of the cable. These currents may cause, depending from the sheath bonding, circulating currents flowing in the cable sheath which reduce the transmission capacity of the cable and cause an additional heating. TE Connectivity’s Raychem link boxes have reliable design and the housing is made
.
Yes! I am InterestedRequest A Callback
SVL SHEATH VOLTAGE LIMITER
Product Price: Rs 4,500 / PieceGet Best Price
Minimum Order Quantity: 25 Piece
Product Brochure
Product Details:
| Phase | three phase & single phase |
| Material | Stainless Steel |
| Brand | RAYCHEM RPG PCA |
| Finishing Type | STEEL |
| Frequency | 50Hz |
| Usage/Application | SVL EARTHING - FOR EHV CABLES |
| Shape | CYINDRICAL |
| Country of Origin | Made in India |
| QUALITY | 5000 |
MV Surge Arrester upto SVL FOR SVL LINK BOXES 145kV for substation protection from lightening and switching over voltages. In past 15 years, almost all high-voltage networks used MO arresters. However, in medium-voltage networks, a substantial number of conventional gapped arresters (SiC resistors and series spark gaps) were installed until a few years ago. Today MO (Metal-Oxide) arresters without spark gaps have gained popularity. Networks require improved protection level and better performance in polluted environments. The switch to polymeric housings made it possible to do without the previously necessary spark gaps. Polymeric housings are reliable against ingress of moisture and provide minimal risk of failures (violent shattering of the housing). MVSA are manufactured using high quality MOV blocks which display excellent thermal and current handling characteristics due to guaranteed homogeneity of the varistor volume. In the wrap design surge arresters, the MOV blocks are wrapped with fiberglass ribbons impregnated with epoxy resin to create stacks of MOV blocks.
- Excellent TOV performance.
- Safe, non-shattering failure in short circuit test
- Higher energy handling capability
- more...
Additional Information:
- Item Code: MCPA2IND
- Production Capacity: 500
- Delivery Time: READY STOCK
- Packaging Details: CARTON BOXES
Yes! I am InterestedRequest A Callback